2023 Latest 100% Exam Passing Ratio - C-TS411-2021 Dumps PDF
Pass Exam With Full Sureness - C-TS411-2021 Dumps with 82 Questions
SAP C-TS411-2021 certification exam is designed for professionals who want to validate their knowledge and skills in SAP S/4HANA R&D Engineering. Certified Application Associate - SAP S/4HANA R&D Engineering certification program is intended for individuals who wish to work with this application as consultants, architects, or developers. The SAP C-TS411-2021 certification exam is an excellent opportunity for professionals to advance their careers and demonstrate their expertise in the field.
NEW QUESTION # 12
What do you have to keep in mind when overwriting characteristic for a specific class?
- A. This change applies only to the characteristic, when it is used in every class.
- B. The status of this characteristic is automatically set to locked.
- C. The status of this characteristic is automatically set to incomplete.
- D. This change applies only to the characteristic, when it is used in this class.
Answer: D
NEW QUESTION # 13
What is the central element of the document key?
- A. Document version
- B. Document part
- C. Document number
- D. Document type
Answer: D
NEW QUESTION # 14
There are item categories that are only allowed in configurable BOMs.What do you have to keep in mind when working with configurable routings?Note: There are 3 correct Answers to this question.
- A. All production resources/tools catgories can be used in non-configurable and configurable routings.
- B. All types of operation can be used in non-configurable and configurable routings.
- C. All sequence categories can be used in non-configurable and configurable routings.
- D. Alternative sequences may only be used in configurable routings.
- E. Equipment as production resources/tools may only be used in configurable routings.
Answer: B,D,E
NEW QUESTION # 15
Which type of object dependencies must contain $self, $parent, or $root at least once?
- A. Pre- and Selection Conditions
- B. All types of object dependencies
- C. Procedures
- D. Constraints
Answer: D
NEW QUESTION # 16
Which of the following objects can you connect with a revision level?Note: There are 2 correct Answers to this question.
- A. Classes
- B. Material Master
- C. Document
- D. Work Center
Answer: B,C
NEW QUESTION # 17
What controls the material BOM item category?Note: There are 2 correct Answers to this question.
- A. A negative quantity is allowed.
- B. A work center is required.
- C. A change number is required.
- D. A material number is required.
Answer: A,D
NEW QUESTION # 18
You activate the check for same classification inside basic data screen of your class. Which restrictions are available?Note: There are 2 correct Answers to this question.
- A. The classification is only checked when you have assigned values to all characteristics.
- B. The classification is only checked when you have assigned values to some characteristics.
- C. The classification is only checked for objects connected to several classes.
- D. The classification is only checked for objects connected to one class.
Answer: A,D
NEW QUESTION # 19
A user releases a document info record with a change number. What effect does this action have on the document info record?Note: There are 2 correct Answers to this question.
- A. The document gets a revision level.
- B. The document displays the release key of the change number.
- C. The document info record uses the validity of a change number.
- D. All document fields are locked.
Answer: A,C
NEW QUESTION # 20
What is the advantage of the Engineering Workbench in comparison to standard material BOM and routing maintenance?Note: There are 3 correct Answers to this question.
- A. Only the Engineering Workbench allows you to make changes to material BOMs and routings using Engineering Change Management.
- B. Material BOMs and routings can be processed together.
- C. Material BOMs, routings, work centers, and material masters can be created and changed.
- D. You can save changes to material BOMs and/or routings and release them for other persons without leaving the Engineering Workbench.
- E. Using a special, optional lock logic, several people can make changes to the same material BOMs and/or routings.
Answer: B,D,E
NEW QUESTION # 21
Which special feature must be taken into account for the material master of material variants for use in logistics?
- A. The material master requires a connection to the configurable material at client level.
- B. The material master requires a link to the configurable material at sales area level.
- C. The material master at client level requires the indicator that it can be configured.
- D. The material master requires a link to the configurable material at plant level.
Answer: D
NEW QUESTION # 22
Which prerequisites must be fulfilled before a configuration profile can be created and released for a configurable material?
- A. Exactly one variant class must be assigned to the configurable material.
- B. At least one variant class must be assigned to the configurable material. Values must not be assigned to the characteristics here.
- C. At least one variant class must be assigned to the configurable material.
- D. At least one variant class must be assigned to the configurable material. Values must be assigned to the characteristics here.
Answer: B
NEW QUESTION # 23
You assigned a released characteristic to a class. What happens when you change the characteristic status to locked?Note: There are 2 correct Answers to this question.
- A. The characteristic is invisible in classes and objects.
- B. This has no effect on the assigned classes or objects.
- C. You cannot change the status as the characteristic is assigned.
- D. You can no longer assign this characteristic to other classes.
Answer: B,D
NEW QUESTION # 24
What do you have to keep in mind when working with value hierarchies?Note: There are 2 correct Answers to this question.
- A. Value nodes are not values.
- B. Only available for characteristics with CHAR or NUM format.
- C. Only available for characteristics with CHAR format.
- D. Value nodes are values.
Answer: A,C
NEW QUESTION # 25
Which routing objects can object dependencies be assigned to?Note: There are 3 correct Answers to this question.
- A. Sequences
- B. Inspection Characteristics
- C. Component Allocation
- D. Operations
- E. Production Resource Tools
Answer: A,D,E
NEW QUESTION # 26
What do you have to keep in mind when working with a class hierarchy?Note: There are 2 correct Answers to this question.
- A. Characteristics values stay on their class and are not inherited.
- B. Characteristics are inherited to all subordinate classes.
- C. You can restrict the value list inherited to your subordinate class.
- D. You can extend the value list inherited to your subordinate class.
Answer: B,C
NEW QUESTION # 27
Which scenarios are possible when you upload files to a Product Master?Note: There are 2 correct Answers to this question.
- A. You cannot attach a Document Info Record.
- B. You can easily attach a Document Info Record.
- C. You can easily upload a file without selecting a Workstation Application and a Content Server.
- D. You can easily upload a file, select a Workstation Application and a Content Server.
Answer: B,C
NEW QUESTION # 28
What is the meaning of the operation number in the routing?
- A. Similar to the BOM, it is only a sort sequence. The increment has no significance.
- B. It determines the sequence in which the operations are processed. The increment has no significance.
- C. It determines the sequence in which the operations are processed. The increment contains wait time and move time.
- D. It determines the sequence in which the operations are processed. The increment contains time buffers (float before and after production).
Answer: D
NEW QUESTION # 29
What do you have to keep in mind when copying a group BOM to a plant specific BOM?Note: There are 2 correct Answers to this question.
- A. The internal BOM number stays unchanged.
- B. The material component must have a plant assignment.
- C. The header status has to be active.
- D. The BOM usage can be changed.
Answer: A,B
NEW QUESTION # 30
You are working with VC Modeling Environment PMEVC. Complete object dependencies are created by drag & drop of one or more characteristic values into a BOM item.What can be created with this drag & drop functionality?Note: There are 2 correct Answers to this question.
- A. Selection conditions only
- B. Local and global object dependencies
- C. Selection conditions and procedures
- D. Local object dependencies only
Answer: B,C
NEW QUESTION # 31
Which application areas can be set inside a release key of an engineering change number?Note: There are 2 correct Answers to this question.
- A. Sales and distribution
- B. Planning and production
- C. Plant maintenance
- D. Costing
Answer: A,B
NEW QUESTION # 32
Why is a Work Center assigned to a Cost Center?
- A. For scheduling to determine transportation time and queue time
- B. For assignment to find suitable people
- C. For costing to use activity types
- D. For capacity to use shift sequences
Answer: C
NEW QUESTION # 33
......
Verified C-TS411-2021 dumps Q&As - 100% Pass from PDFVCE: https://www.pdfvce.com/SAP/C-TS411-2021-exam-pdf-dumps.html
Pass C-TS411-2021 Exam in First Attempt Guaranteed 2023 Dumps: https://drive.google.com/open?id=1AqZkPQaWdj_3xi0mpPFYhDOOlyFAn2d-