Free Sales Ending Soon - 100% Valid 220-1001 Exam Dumps with 752 Questions [Q92-Q110]

Share

Free Sales Ending Soon - 100% Valid 220-1001 Exam Dumps with 752 Questions

Verified 220-1001 dumps Q&As on your A+ Exam Questions Certain Success!

NEW QUESTION # 92
A user brings in a smartphone for repair. The device is unable to send/receive calls or connect to WiFi. All applications on the device are working unless they require connectivity.
Which of the following is MOST likely causing the problem?

  • A. Tethering
  • B. Airplane mode
  • C. Disabled hot-spot
  • D. VPN

Answer: B


NEW QUESTION # 93
Joe, a user, needs to have a notebook connected to a monitor, a mouse, and a keyboard when he is working at his desk. His notebook is not business class, yet it meets company policy for personal computers. Which of the following should a technician install for Joe?

  • A. KVM switch
  • B. Port forwarding device
  • C. Docking station
  • D. USB Hub

Answer: C


NEW QUESTION # 94
Which of the following display types will be able to show the WIDEST range of colors?

  • A. LCD
  • B. TFT
  • C. CCFL
  • D. OLED

Answer: D


NEW QUESTION # 95
Laura, a customer, has instructed you to configure her home office wireless access point.
She plans to use the wireless network for finances and has requested that the network be setup with the highest encryption possible.
Additionally, Laura knows that her neighbors have wireless networks and wants to ensure that her network is not being interfered with by the other networks.
She requests that the default settings be changed to the following.
Wireless Name: HomeWiFi
Shared Key: CompTIA
Router Password: Secure$1
Finally, Laura wants to ensure that only her laptop and Smartphone can connect to the network.
Laptop: IP Address 192.168.1.100
Hardware Address: 00:0A:BF:03:C4:54
Smartphone: IP Address 192.168.1.101
Hardware Address: 09:2C:D0:22:3F:11
INSTRUCTIONS
Configure Laura's wireless network using the network adapter window.
If at any time you would like to bring back the initial state of the situation, please click the Reset All button.



Answer:

Explanation:
See the explanation below



NEW QUESTION # 96
After restoring a laptop to factory settings, a client can no longer use the touchpad on it. A technician verifies the system state was fully restored from the most recent, fully working backup. Which of the following should the technician check for NEXT using the fewest number of steps?

  • A. System restore
  • B. Updated drivers
  • C. Installed USB mouse
  • D. Function key toggle

Answer: D


NEW QUESTION # 97
A technician receives a cellular from a manager. The technician is instructed to download a service manual directly from the Internet to a laptop. However, there is no WiFi signal or wired Ethernet.
Which of the following would be the MOST appropriate connections for the technician to use?

  • A. NFC
  • B. Hotspot
  • C. Bluetooth
  • D. VPN

Answer: B


NEW QUESTION # 98
A user from a remote office is trying to connect lo the wireless network at the corporate headquarters but is unable to find It. After calling the help desk, the user receives the following credentials to connect to the network:

The user enters the credentials as given but is still unable to connect to the wireless network. Which of the following should the user try FIRST to connect to the network?

  • A. Check for the proper credentials.
  • B. Check If another device can see the network.
  • C. Enter the SSID of the network manually.
  • D. Install a new wireless card.

Answer: A


NEW QUESTION # 99
A customer is experiencing issues connecting to a server over the network during normal business hours.
Historically, the connection has worked fine, but it has become intermittent over the past 24 hours. Sometimes the share is available, and sometimes the customer gets an error. A technician researches the issue and discovers a new IT vendor visited the customer's site and installed some new computer equipment without consulting the internal team. Which of the following represents the MOST likely reason the customer is having issues connecting to the server?

  • A. A firewall is blocking the SMB ports.
  • B. Disabled legacy protocols need to be updated.
  • C. A server was taken offline for routine maintenance.
  • D. There is an IP address conflict on the network.

Answer: C


NEW QUESTION # 100
A user wants to synchronize confidential information on a computer and a smartphone.
Which of the following would provide the MOST security during the synchronization process?

  • A. VPN over WiFi
  • B. Mutual authentication
  • C. Physical connection
  • D. Bluetooth

Answer: C


NEW QUESTION # 101
Ann, a customer, purchased a pedometer and created an account on the manufacturer's website to keep track of her progress. Which of the following technologies will Ann MOST likely use to connect the pedometer to her desktop lo transfer her information to the website?

  • A. NFC
  • B. Tethering
  • C. Bluetooth
  • D. Infrared

Answer: A


NEW QUESTION # 102
A technician installed a Cat 5 UTP cable approximately 275ft (84m) from a network switch in an office to a workstation located on a factory floor. The technician sees both a flashing green LED and a flashing orange LED on the workstation's NIC.
Which of the following should the technician do FIRST?

  • A. Install a powered hub as close as possible to the halfway point in the Cat 5 UTP cable run.
  • B. Run continuity tests using an Ethernet cable tester to determine if any pairs are broken.
  • C. Check the RJ45 end connectors, the jacks, and the ends of the run of the Cat 5 UTP cable for loose connections, pinched bends, and visible damage.
  • D. Replace the entire run of Cat 5 UTP cable with Cat 5 STP cable.

Answer: B


NEW QUESTION # 103
A user is having trouble printing and has asked a technician for help. The technician is able to print remotely from the print server. Which of the following will the technician MOST likely need to perform NEXT?
(Choose two.)

  • A. Clear the print queue on the server
  • B. Check the network settings on the computer
  • C. Replace the printer's network cable
  • D. Modify the environment variables on the computer
  • E. Check the AD account settings for the user
  • F. Delete all the files from the server print spooler

Answer: A,B


NEW QUESTION # 104
Which of the following connector types would MOST likely be used to charge a laptop computer?

  • A. eSATA
  • B. USB-C
  • C. RJ45
  • D. Lightning

Answer: B


NEW QUESTION # 105
A high-end workstation is operating as expected, but two of the four SATA drives are displaying solid fault lights Which of the following is the MOST likely reason for this issue?

  • A. An M 2 boot device is being used
  • B. RAID 5 is being used
  • C. The RAID level of the disk array is 10
  • D. The RAID controller cache is turned on

Answer: D


NEW QUESTION # 106
A technician finishes building a custom gaming computer When the system is turned on, however, all the fans spin and the LEDs light up on the motherboard, but the system does not POST and the monitor remains blank.
Which of the following did the technician fail to conned to the motherboard''

  • A. CPU power cable
  • B. SATA signal cable
  • C. Power LED
  • D. Motherboard power cable

Answer: B


NEW QUESTION # 107
A technician receives a smartphone that has been experiencing screen-related issues. The display is barely visible, and the battery indicates the charge level is very low. The technician connects the device to a power source, but the screen remains dim. Which of the following should the technician perform FIRST to resolve the issue?

  • A. Enable airplane mode on The smartphone.
  • B. Reset the smartphone to factory settings.
  • C. Manually restart the smartphone.
  • D. Remove and reinsert the smartphone's battery.

Answer: B


NEW QUESTION # 108
A network administrator is looking for a cost-effective way to power a single network device over ..

  • A. PoE switch
  • B. Bridge
  • C. Injector
  • D. Ethernet power

Answer: D


NEW QUESTION # 109
A technician is selecting a long VGA cable to run through the walls and ceiling to a projector. Which of the following cable features will help minimize interference with the video signal?

  • A. Copper conductors
  • B. Plenum
  • C. Ferrite core
  • D. Fiber

Answer: C


NEW QUESTION # 110
......


Certification Path

The CompTIA A+ Core 1 certification includes only one 220-1001 certification exam.

 

220-1001 Exam Dumps - 100% Marks In 220-1001 Exam: https://www.pdfvce.com/CompTIA/220-1001-exam-pdf-dumps.html

Exam Dumps Use Real A+ Dumps With 752 Questions: https://drive.google.com/open?id=1yjPIj8K8m39UPDztq5_rQUg4o7kNY1mQ