Most UptoDate HP HPE0-J58 Exam Dumps PDF 2022
100% Free HPE Master ASE HPE0-J58 Dumps PDF Demo Cert Guide Cover
HP HPE0-J58 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 25
A customer needs a new replication solution that makes use of capacity efficiency technologies, even though data is being replicated to another array.
You have been developing a solution that includes two HPE 3PAR arrays. What should you emphasize in your proposal?
- A. The arrays share deduplication hash tables, and the target array only needs to compress the replicated data from the source array
- B. Thin Technologies, deduplication, and compression can be used on both sides with volumes in Remote Copy groups
- C. Compression technologies increase the effective bandwidth being available for replication and disaster recovery
- D. The data being replicated will travel the connection between the arrays fully compressed and deduplicated
Answer: D
NEW QUESTION 26
A customer has an aging Fibre Channel SAN from one vendor and a separate iSCSI SAN from another vendor. The customer wants to upgrade to a single vendor that will allow them to manage the SAN through a single vendor management console.
Which solution should you recommend?
- A. one HPE Nimble Storage Fibre Channel Group and one HPE Nimble Storage iSCSI Group
- B. one HPE Nimble Fibre Channel group federated to an HPE 3PAR for iSCSI
- C. one HPE Nimble iSCSI group federated to an HPE 3PAR for Fibre Channel
- D. one HPE Nimble Storage Group that has a Fibre Channel port and a ISCSI pool
Answer: A
NEW QUESTION 27
A customer wants to take advantage of ISL aggregation within a Brocade switch configuration. The customer has added the necessary licenses to allow the forming of trunks in the configuration. You have already provided the standard SAN design guidelines.
Which additional recommendation should you suggest to the customer?
- A. Place the non-trunking switches at the core of the fabric.
- B. Use redundant trunk groups in redundant fabrics to increase availability
- C. Add paths to trunks, so the paths that are longer will cause traffic to be rerouted.
- D. Place the trunking-capable switches at the edge of the fabric
Answer: B
NEW QUESTION 28
A customer wants to upgrade an existing HPE 3PAR 7000 running HPE 3PAR OS 3.2.2. The customer agrees to run an assessment.
What are the requirements to gather configuration and capacity data and/or performance statistics?
- A. enabled rest API interface
- B. configured password-less SSM
- C. enabled Telenet protocol
- D. configured FTP Server
Answer: A
NEW QUESTION 29
Which advantage does InfoSight for HPE Storage deliver to a customer?
- A. intelligence in the customer datacenter
- B. automatic firmware download and deployment for Nimble storage arrays
- C. online ordering of required capacity and license upgrades
- D. an AI recommendation engine to predict issues and analyze root causes
Answer: D
NEW QUESTION 30
A startup company is considering an HPE Nimble solution. They have a small IT budget, and they need to be future-proof for changing performance requirements. How does the Nimble architecture meet the company needs? (Select two.)
- A. ability to mix-and-match All flash and hybrid nodes
- B. native support for block and file services
- C. non-disruptive technology refresh
- D. minimal downtime technology refresh
- E. Support for FCoE
Answer: A,E
NEW QUESTION 31
How does the HPE Nimble Storage product strategy support a customer's investment protection requirements for today and the future?
- A. by supporting the implementation of third party cache, spinning media, and flash media
- B. by supporting the repurposing of obsolete array controllers as high-density servers
- C. by supporting replication between current and previous-generation array models
- D. by supporting replication with arrays from other vendors
Answer: A
NEW QUESTION 32
A customer has two data centers in a metropolitan area. The link between the data centers is IP-based and satisfies the bandwidth and latency requirements. They have the following requirements:
Transparently and automatically failover and fall back between sites
Provide block and file access
Block access must provide connectivity for fibre channel and iSCSi hosts
All-Flash storage solution
You plan to propose a design based on HPE 3PAR storage arrays.
What would be the most cost-effective model that meets the customer needs?
- A. HPE 3PAR 8450
- B. HPE 3PAR 20450
- C. HPE 3PAR 20850
- D. HPE 3PAR 9450
Answer: A
NEW QUESTION 33
You have chosen to utilize HPE 3PAR synchronous replication in order to meet the customer stated
requirement of RPO=0. What is a key consideration you need to explain to the customer?
- A. Host write latencies will decrease
- B. RC sync can only be deployed over FC links
- C. Host write latencies will increase
- D. Host writes can be committed to either primary or backup storage before host acknowledgment
Answer: C
Explanation:
Reference:
us&docLocale=en_US(p.17)
NEW QUESTION 34
A customer needs a new replication solution that makes use of capacity efficiency technologies, even though data is being replicated to another array.
You have been developing a solution that includes two HPE 3PAR arrays. What should you emphasize in your proposal?
- A. The arrays share deduplication hash tables, and the target array only needs to compress the replicated
data from the source array - B. Compression technologies increase the effective bandwidth being available for replication and disaster
recovery - C. Thin Technologies, deduplication, and compression can be used on both sides with volumes in Remote Copy groups
- D. The data being replicated will travel the connection between the arrays fully compressed and deduplicated
Answer: D
NEW QUESTION 35
A customer uses HPE Nimble storage with replication in a VMware environment. The customer wants to implement the Site Recovery Manager plugin in vCenter server to able to create and test disaster recovery plans
Which software do they need to add to the SRM servers?
- A. Nimble SmartReplicate
- B. HPE infoSight
- C. Nimble Storage Replication Adapter
- D. Nimble Connection Manager
Answer: A
NEW QUESTION 36
A customer configured the RCIP ports on two HPE 3PAR arrays, and cabled them to the respective networks. The remote copy links between the arrays are established, and the remote copy service Is started successfully. The customer wants to ensure they have a latency lower than 5 ms and can support a throughput of 8 Gb/s.
What should you do to verify the links are correctly sized to support the replication bandwidth required?
- A. Use the relink status check from the 3PAR SSMC
- B. Check the relink statistics reported in InfoSight
- C. Use the checkrclink command from the 3PAR CLI.
- D. Ask the network administrator to check the latency
Answer: C
NEW QUESTION 37
A customer wants to implement a disaster recovery plan for their current HPE 3PAR array dat A.
They have obtained a remote site 10km away their primary site. They have performed bandwidth testing,
and have confirmed their RTT is approximately 100ms. The customer needs to provide data replication to assure the best data availability they can achieve.
Which synchronization method meets their needs?
- A. Synchronous Remote Copy
- B. Asynchronous Streaming
- C. Asynchronous Periodic Remote Copy
- D. Peer Persistence
Answer: C
NEW QUESTION 38
A customer's primary and OR datacenter are over 700 km apart. The customer wants to minimize data loss during a OR failover, but is worried about the potential production IO performance impact of replicating their data.
You recommend HPE 3PAR asynchronous replication.
Which key factor should you explain about the proposed solution?
- A. Most writes are acknowledged as soon as they are performed on both the primary and secondary storage array
- B. Host writes are acknowledged as soon as they are performed on the primary storage array
- C. All writes are written to the target
- D. Host write latencies win increase
Answer: B
NEW QUESTION 39
A customer's environment has.
* one HPE 3PAR 9000 series funning OS 3.3.1. direct-connected to a single host
* two HPE 3PAR 20000 series fc arrays recently upgraded to OS 3.2.2
The customer recently purchased a third HPE 3PAR 20000 series fc array running OS 3.2.2 and wants to incorporate all four as Storage Federation members.
What should you do before implementing Storage Federation?
- A. Change Direct connection to FC-based array
- B. Upgrade arrays to match highest OS version
- C. Install a Peer Motion License only on the 20000 series array.
- D. Decommission the HPE 9000 series array.
Answer: D
NEW QUESTION 40
A customer is experiencing high utilization on their VMware ESXi server NICs when they backup virtual machines stored on an HPE 3PAR 8200.
Which technology is available on a StoreOnce VSA to reduce the network utilization?
- A. Transportable shadow copies
- B. Catalyst target-side deduplication
- C. Backup from storage snapshots
- D. Adaptive Data Reduction
Answer: B
NEW QUESTION 41
A customer needs to replace their outdated storage arrays.
Which resource provides the necessary information to properly size a solution?
- A. HPE Storage Sizer
- B. HPE Storage Assessment Foundry
- C. HPE Ninja Stars for Nimble
- D. HPE NinjaCrawler
Answer: A
NEW QUESTION 42
Which advantage does InfoSight for HPE Storage deliver to a customer?
- A. intelligence in the customer datacenter
- B. an AI recommendation engine to predict issues and analyze root causes
- C. automatic firmware download and deployment for Nimble storage arrays
- D. online ordering of required capacity and license upgrades
Answer: A
NEW QUESTION 43
A customer is expecting rapid growth of their data storage needs on their HPE Nimble arrays. Which HPE tool should you recommend to best assist with capacity planning?
- A. One Config Advanced
- B. NinjaStars for Nimble
- C. InfoSight
- D. NinjaCrawler
Answer: C
NEW QUESTION 44
A customer needs a solution that will scale out with multiple arrays for replication and will guarantee increased IOPS over the life of the solution.
Which HPE program should you leverage in your solution to help meet the customer's requirements?
- A. HPE Store More Guarantee
- B. HPE SimpliVity HyperGuarantee
- C. HPE Get 6-Nines Guarantee
- D. HPE Nimble Timeless storage
Answer: D
NEW QUESTION 45
A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.
What should you recommend to the customer?
- A. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs
- B. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
- C. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
- D. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
Answer: C
Explanation:
Explanation/Reference:
Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8914ENW.pdf
NEW QUESTION 46
A customer is Interested in an HPE storage solution. The customer's current solution requites installation of host software to make advanced storage array features available to hosts.
You propose a solution consisting of two HPE 3PAR arrays using Remote Copy and Peer Persistence
What should you emphasize during your presentation?
- A. The host software required for a transparent failover can be updated without rebooting the server.
- B. HPE 3PAR Peer Persistence does not need specific host software for automatic transparent failover.
- C. Once the setup of the array has been completed, the host software can safely he uninstalled
- D. Host software is only required when the automatic failover is configured with more then two 3PAR arrays.
Answer: B
NEW QUESTION 47
A customer has an HPE 3PAR 8400 with two nodes installed. They plan to add a critical Oracle database to the array They need to ensure performance Is maintained during array OS upgrades. What should you recommend to the customer?
- A. Change to a smaller drive type to Improve performance for the node count installed.
- B. Add sufficient enclosures to enable HA cage for the array
- C. Since every controller is upgraded in a sequential way. they can proceed with the upgrade with no further requirements
- D. Add an additional node pair to increase performance and avoid write-through mode
Answer: D
NEW QUESTION 48
You are using NinjaStars to develop a proposal to refresh a customer's storage infrastructure.
Which information is needed from the existing environment to properly design a solution? (Select two.)
- A. RAID type
- B. total IOPS
- C. response time
- D. visualization ratio
- E. number of Installed controllers
Answer: A,B
NEW QUESTION 49
......
Updated HP HPE0-J58 Dumps – PDF & Online Engine: https://www.pdfvce.com/HP/HPE0-J58-exam-pdf-dumps.html
PDF Exam Material 2022 Realistic HPE0-J58 Dumps Questions: https://drive.google.com/open?id=1yt6FQ8V6QFCnJzlozmhP3KBqYF7wZtD-