Use Real Fortinet Achieve the NSE6_FWF-6.4 Dumps - 100% Exam Passing Guarantee
Verified NSE6_FWF-6.4 Q&As - Pass Guarantee NSE6_FWF-6.4 Exam Dumps
NEW QUESTION # 11
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 81 Tunnel-Private-Group-ID
- B. 64 Tunnel-Type
- C. 58 Egress-VLAN-Name
- D. 83 Tunnel-Preference
- E. 65 Tunnel-Medium-Type
Answer: A,B,E
Explanation:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION # 12
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. Open, with radius MAC filtering
- B. WPA2 Enterprise
- C. WPA2 Personal and radius MAC filtering
- D. WPA3 Enterprise
Answer: C
NEW QUESTION # 13
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- B. Areas with the signal strength weaker than -68 dB are cut out of the map
- C. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- D. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
Answer: A
NEW QUESTION # 14
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Broadcast
- B. DHCP
- C. Multicast
- D. Static
Answer: B
NEW QUESTION # 15
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured to authenticate using a radius server
- B. A VAP configured for captive portal authentication
- C. A VAP configured for WPA2 or 3 Enterprise
- D. A VAP configured to authenticate locally on FortiGate
Answer: A,C
Explanation:
Explanation
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION # 16
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Reduce the number of wireless networks being broadcast by the AP
- B. Enable frequency handoff on the AP to band steer clients
- C. Install another AP in the reception area to improve available bandwidth
- D. Increase the transmission power of the AP radios
Answer: B
NEW QUESTION # 17
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the AP CLI, using the cw_diag -d sta command
- B. On the controller CLI, using the diag wireless-controller wlac -d sta command
- C. On the controller CLI, using the WiFi Client monitor
- D. On the AP CLI, using the cw_diag ksta command
Answer: D
NEW QUESTION # 18
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Hardware security token authentication
- B. Short message service authentication
- C. Social networks authentication
- D. Software security token authentication
Answer: A,C
Explanation:
This information along with the social network authentication logins with Facebook, Google, Instagram, LinkedIn, or FortiPresence using your WiFi.
Captive Portal configurations for social media logins and internet access. You can add and manage sites using the integrated Google maps and manoeuvre your hardware infrastructure easily.
NEW QUESTION # 19
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- B. Indicates channels that cannot be used because of regulatory channel restrictions
- C. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: A
Explanation:
Explanation
This frequencies are also used by other licensed applications, wireless LANs have to use a specific method to gain access to certain higher frequencies and this method is known as DFS.
NEW QUESTION # 20
Which factor is the best indicator of wireless client connection quality?
- A. The channel utilization of the channel the client is using
- B. Downstream link rate, the connection rate for the AP to the client
- C. The receive signal strength (RSS) of the client at the AP
- D. Upstream link rate, the connection rate for the client to the AP
Answer: C
Explanation:
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.
NEW QUESTION # 21
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- B. Areas with the signal strength weaker than -68 dB are cut out of the map
- C. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- D. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
Answer: A
NEW QUESTION # 22
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Reduce the number of wireless networks being broadcast by the AP
- B. Increase the transmission power of the AP radios
- C. Enable frequency handoff on the AP to band steer clients
- D. Install another AP in the reception area to improve available bandwidth
Answer: B
NEW QUESTION # 23
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured to authenticate using a radius server
- B. A VAP configured for captive portal authentication
- C. A VAP configured for WPA2 or 3 Enterprise
- D. A VAP configured to authenticate locally on FortiGate
Answer: A,C
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION # 24
What type of design model does FortiPlanner use in wireless design project?
- A. Predictive model
- B. Integration model
- C. Analytical model
- D. Architectural model
Answer: D
Explanation:
FortiPlanner will look familiar to anyone who has used architectural or home design software.
NEW QUESTION # 25
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. DTLS encryption on wireless traffic must be turned off
- B. SQL services must be running
- C. Wireless network security must be set to open
- D. Two wireless APs must be sending data
Answer: B
Explanation:
Explanation
https://docs.fortinet.com/document/fortipresence-vm/1.2.0/administration-guide/546812/introduction
NEW QUESTION # 26
Which two statements about background rogue scanning are correct? (Choose two.)
- A. A dedicated radio configured for background scanning can support the connection of wireless clients
- B. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- C. Background rogue scanning requires DARRP to be enabled on the AP instance
- D. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
Answer: A,B
Explanation:
To enable rogue AP scanning
NEW QUESTION # 27
Which statement is correct about security profiles on FortiAP devices?
- A. Security profiles can only be applied via firewall policies on the FortiGate.
- B. Security profiles can only be applied to unencrypted wireless traffic.
- C. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.
- D. Security profiles are only supported on Bridge-mode SSIDs.
Answer: C
Explanation:
Explanation
Security profiles are a feature that allows FortiAP devices to apply various security functions to the wireless traffic, such as antivirus, web filter, application control, intrusion prevention, and botnet scanning. Security profiles can be enabled on both tunnel-mode and bridge-mode SSIDs, and can be applied either through the wireless controller configuration or through firewall policies on the FortiGate device. Security profiles can also inspect encrypted wireless traffic, as long as the FortiAP device has access to the encryption keys.
Security profiles on FortiAP devices can use FortiGate subscription services to inspect the traffic, such as FortiGuard Antivirus, FortiGuard Web Filter, FortiGuard Application Control, and FortiGuard IPS. This means that the FortiAP device can leverage the latest threat intelligence and updates from Fortinet to protect the wireless network from malicious or unwanted content.
Therefore, the correct answer is D. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.
References:
FortiAP-S and FortiAP-U bridge mode security profiles
Configuring security | FortiAP / FortiWiFi 6.4.2
Security profiles - Fortinet Document Library
NEW QUESTION # 28
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- B. Indicates channels that cannot be used because of regulatory channel restrictions
- C. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: C
NEW QUESTION # 29
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Project information phase
- B. Installation phase
- C. Site survey phase
- D. Hardware selection phase
Answer: A,C
Explanation:
Explanation
According to the web search results, the project information phase and the site survey phase are part of the process to plan a wireless design project. The project information phase involves defining the project scope, objectives, requirements, deliverables, and stakeholders. It also includes creating a project plan, a risk management plan, a communication plan, and a budget.1 The site survey phase involves conducting a physical inspection of the site where the wireless network will be deployed, measuring the signal strength and interference levels, identifying the optimal locations for the access points and antennas, and validating the network performance and coverage.2 The hardware selection phase and the installation phase are not part of the planning process, but rather part of the implementation process. The hardware selection phase involves choosing the appropriate wireless devices, such as access points, routers, switches, controllers, and cables, based on the network design and specifications.3 The installation phase involves installing, configuring, testing, and documenting the wireless network components according to the project plan and best practices.3 References: Wireless Device Network Planning and Design - Emerson, Telecommunications and Implementation Project Management - BICSI, Project Planning | Wireless Design Services | Digi International
NEW QUESTION # 30
Which factor is the best indicator of wireless client connection quality?
- A. The channel utilization of the channel the client is using
- B. Downstream link rate, the connection rate for the AP to the client
- C. Upstream link rate, the connection rate for the client to the AP
- D. The receive signal strength (RSS) of the client at the AP
Answer: C
NEW QUESTION # 31
Which two statements about background rogue scanning are correct? (Choose two.)
- A. A dedicated radio configured for background scanning can support the connection of wireless clients
- B. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- C. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- D. Background rogue scanning requires DARRP to be enabled on the AP instance
Answer: A,D
NEW QUESTION # 32
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. Disable intra-vap-privacy for the Authors vap-wireless network
- B. Increase the transmission power of the AP radio interfaces
- C. For both interfaces in the wtp-profile, configure vap-all to be manual
- D. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
Answer: C,D
Explanation:
Explanation
The configuration changes that will resolve the issue are to configure set vaps to be "Authors" for both interfaces in the wtp-profile, and to configure vap-all to be manual for both interfaces in the wtp-profile. This is because the current configuration does not assign any VAPs to the AP interfaces, which means that no wireless networks are broadcasted by the APs. The vap-all setting determines whether all VAPs are assigned to an interface or not, and the vaps setting specifies which VAPs are assigned to an interface. By setting vap-all to manual and vaps to "Authors", the APs will only broadcast the Authors wireless network on both interfaces. Disabling intra-vap-privacy for the Authors vap-wireless network will not help, as it only affects the communication between clients on the same SSID, not their connection to the AP. Increasing the transmission power of the AP radio interfaces will not help, as it only affects the signal strength and coverage of the APs, not their broadcasting of wireless networks. References: wireless-controller vap | FortiGate / FortiOS 6.4.0, Technical Note: How to configure intra-SSID privacy
NEW QUESTION # 33
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- B. Indicates channels that cannot be used because of regulatory channel restrictions
- C. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: A
NEW QUESTION # 34
......
The NSE6_FWF-6.4 certification exam is intended for those who have a deep understanding of Fortinet's secure wireless LAN technologies and are keen to validate their skills. NSE6_FWF-6.4 exam tests the candidate's understanding of the configuration, management, and troubleshooting of Fortinet's secure wireless LAN solutions. Additionally, it evaluates the candidate's ability to integrate Fortinet's secure wireless LAN technologies with other security solutions.
Achieving the Fortinet NSE6_FWF-6.4 certification can be a valuable asset for network security professionals, as it demonstrates a high level of expertise in secure wireless LAN technologies. Fortinet NSE 6 - Secure Wireless LAN 6.4 certification can help individuals advance their careers and increase their earning potential, as well as provide employers with assurance that their network security professionals have the knowledge and skills needed to deploy and manage secure wireless networks.
Check the Free demo of our NSE6_FWF-6.4 Exam Dumps with 37 Questions: https://www.pdfvce.com/Fortinet/NSE6_FWF-6.4-exam-pdf-dumps.html
Clear your concepts with NSE6_FWF-6.4 Questions Before Attempting Real exam: https://drive.google.com/open?id=1trk7TqJ7mbjPCoGPDNxO-IWFVUti48Go